GPU Flavors

Configuring GPU flavors

Setting up GPU flavors

Support for GPU can be added to flavors using the PCI passthrough feature in OpenStack. This allows to plug any kind of PCI device to the Virtual Machines.

As a summary of the OpenStack documentation, these are the steps needed to add a GPU enabled flavor (be aware this may need tuning to your specific hardware/configuration!):

On computing node, get vendor/product ID of your hardware: lspci | grep NVDIA to get pci slot of GPU, then virsh nodedev-dumpxml pci_xxxx_xx_xx_x
On computing node, unbind device from host kernel driver. Unbinding is system dependent, and can be done in many ways, e.g.:
- if the kernel does not uses the devices (no GPU drivers included in kernel, or drivers disable in GRUB), nothing to unbind
- via pci-stub grubby --args="pci-stub.ids=10de:11fa" --update-kernel DEFAULT (see RedHat manual, section 12.1, step 1-2; where the pci-stub.ids value is vendor_ID: product_id from lspci.
- via echo command: echo $dev > /sys/bus/pci/devices/$dev/driver/unbind where $dev is the PCI device ID xx:xx.x or xxxx:xx:xx.x from lspci
On computing node, add pci_passthrough_whitelist = {"vendor_id":"xxxx","product_id":"xxxx"} to nova.conf (see nova-compute)
On controller node, add pci_alias = {"vendor_id":"xxxx","product_id":"xxxx", "name":"GPU"} to nova.conf (see nova-api)
On controller node, enable PciPassthroughFilter in the scheduler (see nova-scheduler)
Create new flavors with pci_passthrough:alias (or add key to existing flavor), e.g. openstack flavor set m1.large --property "pci_passthrough:alias"="GPU:2"

GPU description in flavor metadata

Users should be able to easily discover the flavors that provide GPUs (or accelerators in general). The following table describes the agreed metadata for EGI providers to add to those flavors:

Metadata	Definition	Comments
Accelerator:Type	Type of accelerator (e.g. `GPU`)	Possible values: `GPU`, `MIC`, `FPGA`, `TPU`, `NPU`
Accelerator:Number	Number of accelerators available in the flavor (e.g. `1.0`)	Non integers allowed for the case of sharing GPU between VMs
Accelerator:Vendor	Name of accelerator Vendor (e.g. `NVIDIA`)
Accelerator:Model	Model of accelerator (e.g. `Tesla V100`)	Need to make consensus and enforce. A100 is usually marketed without “Tesla” classname. Similarly, RTX A6000 usually marketed without “GeForce”. For clarity, full names should be used: “Tesla A100” and “GeForce RTX A6000”
Accelerator:Version	Version of the accelerator	Some cards have different versions, e.g. A100 PCIe and NVLink. Openstack does not allow empty value, so we should give 0 if no version is specified
Accelerator:Memory	RAM in GBs of the accelerator
Accelerator:VirtualizationType	Type of virtualisation used (e.g. `PCI passthrough`)	Not relevant for accounting, but may be still useful in some cases

There are some extra fields that are defined in the GLUE2.1 schema but not so relevant for GPUs and therefore not considered at the moment. These are listed below for completeness:

Metadata	Definition	Comments
Accelerator:ComputeCapability	Compute capabilities	Defined by GLUE2.1, e.g. floating point type, NVLink, … may be used informally so far
Accelerator:ClockSpeed	Clockspeed of accelerator	Defined by GLUE2.1, not so relevant, as ClockSpeed no longer related to performance. May be reserved for other types of accelerators
Accelerator:Cores	Number of cores of the accelerator	Not so useful as there are several types of cores now (CUDA, tensor). May be reserved for other types of accelerators

Adding metadata to flavors has no effects on site operations. End users can see the metadata easily via openstack flavor list --long or openstack flavor show <flavor id> commands without any additional tools, e.g.:

$ fedcloud openstack flavor show gpu1cpu2  --site IISAS-GPUCloud --vo eosc-synergy.eu -f json
Site: IISAS-GPUCloud, VO: eosc-synergy.eu
{
  "OS-FLV-DISABLED:disabled": false,
  "OS-FLV-EXT-DATA:ephemeral": 0,
  "access_project_ids": null,
  "disk": 40,
  "id": "a8082202-f647-4d1f-9b97-4f5ddb38ae8e",
  "name": "gpu1cpu2",
  "os-flavor-access:is_public": false,
  "properties": "Accelerator:Version='0', Accelerator:Memory='5', Accelerator:Model='Tesla K20m', Accelerator:Number='1.0', Accelerator:Type='GPU', Accelerator:Vendor='NVIDIA', Accelerator:VirtualizationType='PCI passthrough', pci_passthrough:alias='GPU:1'",
  "ram": 8192,
  "rxtx_factor": 1.0,
  "swap": "",
  "vcpus": 2
}

Last modified November 16, 2021 by Baptiste Grenier : Fix super-lint runs: Customise textlint, fix files and disable check of assets/scss (#361)